Company capability statement

01 — Company particulars

02 — Approach

Titan Remedial Solutions is a remedial building contractor serving Melbourne and Victoria. Every engagement begins with a structured condition investigation and a written report. The repair scope is developed from those findings and documented through delivery, so that the cause is addressed rather than the symptom and the price reflects established extent.

03 — Technical capability

C-01 Diagnostic investigation

Condition surveys incorporating cover meter, carbonation and chloride testing, half-cell potential mapping, moisture mapping and electronic leak detection, drone survey and representative investigation openings, issued as a written condition report with a numbered defect schedule.

C-02 Concrete repair & corrosion management

Break-out and reinstatement to sound substrate, reinforcement treatment, polymer-modified repair mortars, migrating corrosion inhibitors, galvanic and hybrid anode systems, anti-carbonation protective coatings.

C-03 Facade remediation

Render and substrate repair, masonry repointing and lintel replacement, precast panel repair and joint reinstatement, protective coating systems, whole-of-facade access strategies.

C-04 Waterproofing & leak rectification

Liquid-applied and sheet membrane systems, falls correction, detail and penetration remediation, injection systems for live cracks and joints, flood testing and verification.

C-05 Structural strengthening

Carbon fibre (CFRP) laminates and fabrics, bonded steel plate, section reinstatement and high-strength grouting, and structural crack injection, installed to the consulting engineer’s design with full quality assurance records.

C-06 Cladding rectification

Combustible cladding replacement to approved fire-engineered designs, cavity barrier and fixing system upgrades, interface fire-stopping, staged delivery maintaining weather-tightness on occupied buildings.

C-07 Balcony & balustrade remediation

Whole-assembly balcony programmes covering slab edge repair, falls correction, trafficable membranes, finishes reinstatement and balustrade anchorage upgrades to engineered detail.

C-08 Preventative maintenance programs

Baseline condition reports, scheduled re-inspection, defect tracking against photographic baselines, and rolling expenditure forecasts aligned to owners corporation budgeting cycles.

04 — Sectors served

• Strata & Owners Corporations Committee-ready proposals, evidence prepared to general meeting standard, and works staged around residents, structured around the way owners corporation decisions are made.
• Commercial Property Remediation for office, retail and mixed-use assets where trading continuity, tenant relations and asset value govern every methodology decision.
• Industrial Facilities Structural and durability repairs in live industrial environments — programmed around production, engineered for chemical and mechanical exposure.
• Heritage Buildings Remediation that respects significant fabric — matched materials, reversible interventions where practicable, and documentation that satisfies heritage permit conditions.
• Government & Infrastructure Durability and structural remediation for public assets — delivered with the compliance systems, reporting and community-interface management that public works require.
• Builders & Developers Defect rectification and remedial packages delivered as a subcontract partner — aligned to the construction programme, documented for close-out, and diagnosed so the defect does not recur.

05 — Credentials & compliance

Certificates of currency, registration details and safety documentation are provided at engagement and available on request at any time.

06 — Service index

1. Concrete Repair — Diagnosis and repair of spalling, cracking and reinforcement corrosion, addressing the electrochemical cause rather than the surface symptom.
2. Water Leaks & Structural Leaking — Locating where water is actually entering before anything is opened up, then stopping it — through slabs, walls, basements, carpark decks and balconies — with the repair matched to the cause.
3. Carbon Fibre Strengthening — Carbon fibre laminate and wrap strengthening of slabs, beams and columns — adding capacity with millimetres of material and no demolition — constructed to the consulting engineer's design and documented for certification.
4. Post-Tensioning Works & Tendon Truncation — Works to post-tensioned slabs — locating tendons, truncating and re-anchoring them where new openings are cut, repairing anchorages and stressing pockets, and replacing damaged tendons — carried out to the structural engineer's design and procedure.
5. Facade Remediation & Restoration — Investigation and repair of facade defects across render, masonry, precast and curtain-wall interfaces, using access strategies that keep buildings occupied and compliant.
6. Balcony & Balustrade Remediation — Remediation of the highest-frequency strata defect end to end, covering membrane, substrate, slab edge and balustrade compliance in a single scoped package.
7. Cladding Rectification & Compliance — Combustible cladding replacement and facade compliance works in the post-Cladding-Safety-Victoria landscape — engineered, permitted, and documented for insurers.
8. Difficult Access & Rope Access — IRATA-standard rope access and engineered access solutions for inspection and repair where scaffold is not the economic option, costed transparently against the alternatives.
9. Preventative Maintenance Programs — Scheduled inspection and planned intervention, converting unpredictable special levies into a budgeted maintenance line supported by documented condition data.

07 — How to engage us

1. Report the defect. Telephone 0436 333 091 or submit the assessment form with photographs and a description of the condition observed.
2. Initial assessment. We attend, assess severity, and secure any element presenting an immediate safety risk.
3. Investigation. A fixed-fee investigation, scoped to the question at hand, producing a written condition report with a numbered defect schedule.
4. Scope and price. An itemised methodology setting out named repair systems, access strategy, staging and programme, formatted for committee approval or review by a consulting engineer.
5. Delivery and verification. Works executed to the approved methodology with defined hold points, followed by a completion report with condition evidence, warranties and a maintenance schedule.